If this screen is disabled, only ASRock logo is shown during the boot up process. In these cases, select [User] to manually enter the IDE hard disk drive parameters. Use keys to move between the Hour, Minute and Second fields. This is necessary so that you can write or read data from the hard disk. Replace the system cover.

Uploader: Mezishura
Date Added: 21 September 2011
File Size: 42.90 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 23842
Price: Free* [*Free Regsitration Required]

You can also restart by turning the system off and then back on. Select mode for the IR transmission port. Refer to your OS documentation for more information.

Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer.

Use this to select Midi IRQ. If automatic detection is successful, BIOS Setup automatically fills in the correct values for the remaining fields on this sub-menu. This allows the user to set CPU host frequency manually.

Failure to do so may cause physical injuries to you and damages to motherboard components. The default is 4X. The CPU fits only in one correct orientation. Also, for proper operation, it is not recommended to use two different brands of the DIMMs at the same time. Valid values for month, day, and year are Month: The Setup program is designed to make it as easy to use as possible.


ASRock K7VT2 – motherboard – ATX – Socket A – KTA Overview – CNET

Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purpose only, and may not exactly match what you see on your screen.

Before you install the motherboard, study the configuration of your chassis audo ensure that the motherboard fits into it.

The motherboard detects the jumper setup and sets the CPU host frequency automatically. Cylinders This field configures the number of cylinders. This allows the user to select the value as operating frequency.

Use this to enable or disable floppy drive controller. ATX form factor 12″ x 9. Enable or Disable onboard LAN. Valid password can be a 1 to 6 alphanumeric characters combination.

Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Select address for Midi Port or disable Midi Port. Supervisor password has been set. Jan to DecDay: The following table lists the keys found in the legend bar with their corresponding functions.


Hold components by the edges and do not touch the ICs. Refer to the drive documentation to determine the correct values. No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

ASRock K7VT2 – motherboard – ATX – Socket A – KT266A

Enable or Disable IDE controllers. Connector FDD connector pin floppy see p.

Refer to the drive documentation to determine the correct value. Select [Auto] to automatically detect hard disk drive. Position the CPU directly above the socket such that its marked corner matches the base of the socket lever.

User password has been set. Unplug the power cord from the wall socket before touching any component.